|
| 1€ - 29,85 грн. |

Struttura 15kg

— Structural weight
— For interior works
— Eco

52.50 

Decorative relief design mixture

Field of application: surface decoration of walls, ceilings and elements of the internal room decoration.

Surface preparation: the surface should be firm, without dust, not crumbling. The quality of surface and roughness are determined by selected technique of application of the decorative mixture.

Applying: apply quartz primer «Primer quarzo» or «Pittura al Quarzo» (ТМ Ferrara Рaint) on prepared surface using a roller or brush. Apply one or two layers of decorative mixture on dried up primer, creating a necessary pattern. Number of layers and used instrument depend on the application technique and wishful result.

The temperature for application: apply in temperature range from +5 to +35 ̊C and relative humidity not more than 70%.

Dilution: the product is ready to use, if necessary, it can be diluted with water, but not more than 10%, if necessary to keep strength – means diluted Penetrazione Adessivo (concentrate diluted with water in a ratio of 1: 3,1: 4) obtained diluted composition weight decorative Struttura until the desired consistency. The quantity of added water is determined by master, according to the necessary viscosity of the material for a specific method of applying, used tool and wishful effect. It is recommended to use«Finitura Strato» (ТМ Ferrara Рaint)as a finishing and decorative coating, which will protect the surface.

Using instruments: float, made of steel or plastic, brush, roller, swab, sponge.

Time of drying: 4-12 hours, it depends on the layer thickness.

Conditions of exploiting: the endurance of this coating determines the finishing layer.

Expense of the material: 1 – 3 m2/kg according to the method of applying and base of material.

Colours: can be colored or finishing coating determines the colour of material.

Pre-packing: 15 kg

Shelf life and storage conditions: store in branded packing at temperature from + 5 to +35 °С – 12 months from the manufactured date. Product should not be exposed to direct sunlight. The manufactured date and lot number are specified on the packing.

Ingredients: water, mineral fillers, functional, bactericidal and thickening additives, acrylic dispersion.

Product code: 20.30.11

Certificate of state registration: ТУ У 20.3-38092260-001:2012

Manufacturer: LLC «Ferrara Group»

Labor protection: the product is not classified as dangerous. See the hygienic conclusion № 05.03.02-04/121216 from 07.12.12, examination protocol № 11376 from 03.12.12. It doesn’t contain as heavy metals as chromium and lead, and also toxic, aromatic, chlorinated solvents. A dangerous for health polymerization is not observed. Keep away from children. In case of eyes contact, rinse immediately with water. Do not allow to enter into sewerage system, reservoirs and soil