Glass coating
Vetro
Decorative coating with spherical glass filler and light pearl shimmer, it has a reflective effect.
Scope: surface Finish of walls, ceilings and decorative elements of the interior.
|
Packaging l |
St-th/pack, Euro |
St-t/l,. |
the Average discharge m2/l |
St-th m2. |
Vetro BASE AR |
1* |
21 |
21 |
8 |
2,63 |
5 |
105 |
21 |
8 |
2,63 |
|
VETRO BASE DC |
1* |
24 |
24 |
7 |
3,43 |
5 |
120 |
24 |
7 |
3,43 |
|
Vetro BASE AR |
1* |
21 |
21 |
8 |
2,63 |
5 |
105 |
21 |
8 |
2,63 |
* Packing 1 liter is not a factory, the cost of the material is not taken into account the price per packagings
Surface Preparation: surface must be sound, smooth, not dusty, not crumbling. As a material for surface preparation it is recommended to use a quality finishing putty.
Application: the prepared surface using a roller in two coats apply the paint quartz – based “Pittura al quarzo” (TM Ferrara Рaint). Dried basis to apply a decorative coating “Vetro” in one or two layers. The number of layers depends on application technique and desired result. the Before application the material must be thoroughly mixed.
Add water: the product is ready to use.
Instrument Used: wide soft brush.
Drying Time: the coating on the surface dry 6 hours, complete the polymerization process of the film of not less than 7 days at a temperature of at least +5°C.
Material: 7-9 m2/l.
Pittura al quarzo
Quartz paint based on acrylic
Scope: is the basis for the decorative coating “Vetro” (TM Ferrara Рaint)
Packaging l |
St-th/pack, Euro |
St-t/l,. |
the Average discharge m2/l |
St-th m2. |
||
Pittura al quarzo |
1* |
9 |
9 |
9 |
1,00 |
|
5 |
45 |
9 |
9 |
1,00 |
||
10 |
80 |
8 |
9 |
0,89 |
* Packing 1 liter is not a factory, the cost of the material is not taken into account the price per packagings
Surface Preparation: the surface must be solid, level, smooth, not dusty, not crumbling. As a material for surface preparation it is recommended to use a quality finishing putty.
Application: the prepared surface using roller, brush or compressor of the at least two layers.
Add water: for strongly moisture-absorbing surfaces: first layer – 50% water, second layer – 30-40% of water. For normal absorbing surfaces: first layer – 40% of water, second layer – 30-40% of water. For application with a compressor 50% water. The amount of water as a percentage of the paint are per volume (1l of paint is diluted with 300 – 500 millilitres of water).
Instrument Used: roller, brush, compressor.
Drying Time: the drying time between coats 6 hours. Hard dry 12 hours.
Material: 7-10 m2/l in two coats depending on the color and absorption of the surface.