Sample № 132-1

Ferrara

Decorative coating with pearl pigments, imitating the surface, draped by silk cloth.

Field of application: surface decoration of walls, ceilings and elements of the interior decoration.

 

Pre-packing, l

Cost/packing, EUR

Cost/l,EUR

Average discharge m2/l

Cost m2, EUR

Ferrara BASE S

1*

21

24

7

3,43

5

120

24

7

3,43

Ferrara BASE DC

1*

32

32

7

4,57

5

160

32

7

4,57

* Packing 1 liter is not a factory, in the value of the material does not take into account the price per packagings

read more

Surface preparation: the surface should be firm, smooth, without dust, not crumbling. It is recommended to use high-quality finishing putty as a material for surface preparation.

Applying: apply two layers of background paint «Fondo Ferrara»(TM Ferrara Paint) on prepared surface using a roller. Apply one or two layers of the decorative coating Ferrara on dried up background paint. A number of layers and used tool depend on the application technique and wishful result.

Dilution with water: the product is ready to use, if necessary, you can dilute it with water, but not more than 30%. The quantity of added water is determined by master, according to the necessary viscosity of the material for a specific method of applying, used tool and wishful effect.

Using instruments: plane (float), made of steel or plastic, brush,roller,swab, sponge.

Time of drying: coating is dry on the surface – 2 hours, the whole process of film polymerization is not less than 7 days at temperature not less than+5°С.

Expense of the material: 6-9 m2/L according to the method of applying.

 

Fondo Ferrara

High-quality thin-layer matt paint on acrylic basis

Field of application: High-quality thin-layer matt paint on acrylic basis is a base for decorative coatings Ferrara and Finitura strato of ТМ Ferrara Рaint. It perfectly fits for interior ceiling painting.

 

Packaging l

Cost/packing, EUR

Cost/l,EUR

Average discharge m2/l

Cost m2, EUR

Fondo Ferrara

1*

10

10

9

1,11

5

50

10

9

1,11

10

90

9

9

1,00

* Packing 1 liter is not a factory, the cost of the material is not taken into account the price per packagings

read more

Surface Preparation: the surface should be firm, smooth, without dust, not crumbling. It is recommended to use high-quality finishing putty as a material for surface preparation.

Applying: apply minimum two layers on prepared surface using a roller, brush or compressor.

Dilution with water: for strongly moisture absorbing surfaces: first layer – 50% of water, second layer – 30-40% of water. For normal absorbing surfaces: first layer – 40% of water, second layer – 30-40% of water. For applying with the help of compressor – 50% of water. The quantity of water percentagewise to paint is specified calculated per volume (1l of paint is diluted with 300 – 500 millilitres of water).

Using instrument: roller, brush, compressor.

Time of drying: time of drying between layers is 4 hours. The whole drying is 12 hours.

Expense of the material: 7-10 m2/L in two layers according to the colour and moisture absorption of the surface.