Sample № 130

Vetro

Decorative coating with spherical glass filler and light pearl shimmer, it has a reflective effect.

Field of application: surface decoration of walls, ceilings and elements of the interior decoration.

 

Packaging l

Cost/packing, EUR

Cost/l,EUR

Average discharge m2/l

Cost m2, EUR

Vetro BASE AR

1*

21

21

8

2,63

5

105

21

8

2,63

VETRO BASE DC

1*

24

24

7

3,43

5

120

24

7

3,43

VETRO BASE P

1*

21

21

8

2,63

5

105

21

8

2,63

* Packing 1 liter is not a factory, the cost of the material is not taken into account the price per packagings

read more

Surface Preparation: the surface should be firm, smooth, without dust, not crumbling. It is recommended to use high-quality finishing putty as a material for surface preparation.

Applying: apply two layers of quartz paint – basis “Pittura al quarzo” (TM Ferrara Paint) on prepared surface using a roller. Apply one or two layers of the decorative coating “Vetro” on dried up basis. Number of layers depends on the application technique and wishful result. It is necessary to mix the material carefully before application. Add water: the product is ready to use.

Dilution with water: the product is ready to use.

Using instrument: wide soft brush.

Time of drying: coating is dry on the surface – 6 hours, the whole process of film polymerization is not less than 7 days at temperature not less than +5°С.

Expense of the material: 7-9 m2/l

 

Pittura al quarzo

Quartz paint on acrylic basis

Field of application: quartz paint on acrylic basis is a base for decorative coating «Vetro» (ТМ Ferrara Рaint)

 

Packaging l

Cost/packing, EUR

Cost/l,EUR

Average discharge m2/l

Cost m2, EUR

Pittura al quarzo

1*

9

9

9

1,00

5

45

9

9

1,00

10

80

8

9

0,89

* Packing 1 liter is not a factory, the cost of the material is not taken into account the price per packagings

read more

Surface Preparation: the surface should be firm, smooth, without dust, not crumbling. It is recommended to use high-quality finishing putty as a material for surface preparation.

Application: apply minimum two layers on prepared surface using a roller, brush or compressor.

Dilution with water: for strongly moisture absorbing surfaces: first layer – 50% of water, second layer – 30-40% of water. For normal absorbing surfaces: first layer – 40% of water, second layer – 30-40% of water. For applying with the help of compressor – 50% of water. The quantity of water percentagewise to paint is specified calculated per volume (1l of paint is diluted with 300 – 500 millilitres of water).

Using instrument: roller, brush, compressor.

Time of drying: time of drying between layers is 6 hours. The whole drying is 12 hours.

Expense of the material: 7-10 m2/L in two layers according to the colour and moisture absorption of the surface.