Sample № 127

Finitura Prottetiva

Deep-protective agent for mineral surfaces

Field of application: It is used as a protective agent for the hydrophobic lime decorative plasters of ТМ Ferrara Рaint.

 

Packaging l

Cost/packing, EUR

Cost/l,EUR

Average discharge m2/l

Cost m2, EUR

Finitura Protettiva

1

15

15

20

0,75

read more

Applying: using a cloth or a soft cloth to dry the surface. The number of layers is determined by the required degree of hydrophobic surface, the minimum – 1 layer.

Dilution with water: ready for use.

Time of drying: 6-12 hours.

Expense of the material: 10-30 m2/L in one layer according to the moisture absorption of the surface.

 

Pietra Lucida

Natural decorative lime-based plaster, using which you can achieve the different effects and also form up a stone surface.

Field of application: surface decoration of walls, ceilings and elements of the interior decoration.

 

Packaging l

Cost/packing, EUR

Cost/l,EUR

Average discharge m2/l

Cost m2, EUR

Pietra Lucida

1*

5

5

3

1,67

14

70

5

3

1,67

* Packing 1 liter is not a factory, the cost of the material is not taken into account the price per packagings

read more

Surface Preparation: The quality of surface preparation is determined by selected technique of application.

Applying: apply one layer of plaster Pietra Lucida (ТМ Ferrara Рaint) on prepared surface with steady absorbability using a metallic float, roller. After drying apply second thin layer of material with a metallic float, polishing it in wet state. The degree of glaze will increase on the surface subject to the quality of polish. It is necessary to apply and push the second layer 2 times when it is wet, polishing it during drying to achieve the natural deep glaze of the surface.
When you use Pietra Lucida as a polishing layer with plasters Pietra apply 1-2 layers with float made from steel subject to wishful effect and degree of base smoothness. On smooth base the material can be applied with roller, polishing during drying. The material is diluted with water 15-25% beforehand.

Dilution with water: the product is ready to use, if necessary, it can be diluted with water. The quantity of added water is determined by master, according to the necessary viscosity of the material for a specific method of applying, used tool and wishful effect.

Using instruments: float made from steel, roller, brush, applicator.

Time of drying: 4-12 hours, it depends on layer thickness.

Expense of the material: 2 – 5 m2/kg according to the method of applying.

 

Pietra Media

Natural decorative lime-based plaster with marble fillers, using which you can achieve the different effects and also imitate rocky and stone cut.

Field of application: surface decoration of walls, ceilings and elements of the interior decoration.

 

Packaging l

Cost/packing, EUR

Cost/l,EUR

Average discharge m2/l

Cost m2, EUR

Pietra Media

1*

3,47

3,47

1

3,47

15

52

3,47

1

3,47

* Packing 1 liter is not a factory, the cost of the material is not taken into account the price per packagings

read more

Surface preparation: the surface should be firm, without dust, not crumbling. The quality of surface preparation is determined by selected technique of application and using base of material.

Application: see ТS Pietra

Dilution with water: the product is ready to use, if necessary, it can be diluted with water, but not more than 5%. The quantity of added water is determined by master, according to the necessary viscosity of the material for a specific method of applying, used tool and wishful effect.

Using instruments: float, made of steel or plastic, brush, applicator.

Time of drying: 4-12 hours, it depends on layer thickness.

Expense of the material: 0,5 – 1,5 m2/kg according to the method of applying and base of material.

 

Primer quarzo

Quartz resistance to alkali pigmented primer on acrylic basis

Field of application: Field of application: quartz resistance to alkali pigmented primer on acrylic basis is a base for lime decorative plasters of ТМ FerraraРaint.

 

Packaging l

Cost/packing, EUR

Cost/l,EUR

Average discharge m2/l

Cost m2, EUR

Primer quarzo

1*

9

9

12

0,75

5

45

9

12

0,75

10

80

8

12

0,67

* Packing 1 liter is not a factory, the cost of the material is not taken into account the price per packagings

read more

Surface Preparation: the surface should be firm, smooth, without dust, not crumbling. It is recommended to use high-quality finishing putty as a material for surface preparation.

Applying: apply on prepared surface using a roller, brush.

Dilution with water: for strongly moisture absorbing surfaces – 80% of water. For normal absorbing surfaces – 60% of water. For concrete and poorly absorbing surfaces – 40-50% of water. The quantity of water percentagewise to primer is specified calculated per volume (1l of primer is diluted with 400 – 800 millilitres of water).

Using instrument: roller, brush.

Time of drying: 12-24 hours.

Expense of the material: 10-15 m2/L according to the moisture absorption of the surface.