Sample № 116

Finitura Strato

Decorative semitransparent varnish with a broad range of pearlescent effects.

Field of application: surface decoration of walls, ceilings and elements of the interior decoration. It can be used in rooms with increased humidity (except places of constant direct exposure to water). It is an effective tone and protective layer for decorative plasters «Pietra», «Pietra Lucida» (ТМ Ferrara Рaint), it can be used as an independent coating, which is applied on background paint «Fondo Ferrara» (ТМ Ferrara Рaint) and also as a finishing coating for other decorative plasters.

 

Packaging l

Cost/packing, EUR

Cost/l,EUR

Average discharge m2/l

Cost m2, EUR

Finitura Strato

1*

22

22

12

1,83

5

110

22

12

1,83

* Packing 1 liter is not a factory, in the value of the material does not take into account the price per packagings

Base P, AU, AR, DC, Opaco

read more

Surface preparation: the surface, on which the material is applied, should be dry, without dust. It is recommended to use deeply penetrating agent with fixing characteristics – «Penetrazione Adesivo» (ТМ FerraraРaint) on strongly absorbing surfaces (lime plasters etc.). See method of application in ТS Penetrazione Adesivo.

Applying as an independent coating: apply «Finitura Strato» on dried-up background paint «Fondo Ferrara» (ТМ Ferrara Рaint) forming wishful pattern. The tracery depends on using instrument. The number of layers is unlimited. The application of one colour to another or their combination at the moment of application makes beautiful decorative effect.
Applying as a decorative layer on raised plasters: the method of application of the material and its dilution with water are determined by master according to wishful effect.

Dilution with water: the product is ready to use, if necessary, you can dilute it with water, but not more than 150%. The quantity of added water is determined by master, according to the necessary viscosity of the material for a specific method of applying, used tool and wishful effect.

Using instruments: brush, roller, swab, sponge, applicator «Mille Righe», putty knife, float, made of steel or plastic, different instruments for creating the decorative effects.

Time of drying: coating is dry on the surface – 2-12 hours, it depends on layer , the whole process of film polymerization is not less than 7 days at temperature not less than +5°С.

Expense of the material: 6-15 m2/L according to the method of applying.

 

Struttura

Decorative relief design mixture

Field of application: surface decoration of walls, ceilings and elements of the internal room decoration.

 

Packaging l

Cost/packing, EUR

Cost/l,EUR

Average discharge m2/l

Cost m2, EUR

Struttura

1*

3,5

3,5

0,6

2,10

15

52,5

3,5

0,6

2,10

* Packing 1 liter is not a factory, the cost of the material is not taken into account the price per packagings

read more

Surface preparation: the surface should be firm, without dust, not crumbling. The quality of surface and roughness are determined by selected technique of application of the decorative mixture.

Applying: apply quartz primer «Primer quarzo» or «Pittura al Quarzo» (ТМ Ferrara Рaint) on prepared surface using a roller or brush. Apply one or two layers of decorative mixture on dried up primer, creating a necessary pattern. Number of layers and used instrument depend on the application technique and wishful result.

Dilution: the product is ready to use, if necessary, it can be diluted with water, but not more than 10%, if necessary to keep strength – means diluted Penetrazione Adessivo (concentrate diluted with water in a ratio of 1: 3,1: 4) obtained diluted composition weight decorative Struttura until the desired consistency. The quantity of added water is determined by master, according to the necessary viscosity of the material for a specific method of applying, used tool and wishful effect. It is recommended to use «Finitura Strato» (ТМ Ferrara Рaint) as a finishing and decorative coating, which will protect the surface.

Using instruments: float, made of steel or plastic, brush, roller, swab, sponge.

Time of drying: 4-12 hours, it depends on the layer thickness.

Expense of the material: 1 – 3 m2/kg according to the method of applying and base of material.

 

Pittura al quarzo

Quartz paint on acrylic basis

Field of application: quartz paint on acrylic basis is a base for decorative coating «Vetro» (ТМ Ferrara Рaint)

 

Packaging l

Cost/packing, EUR

Cost/l,EUR

Average discharge m2/l

Cost m2, EUR

Pittura al quarzo

1*

9

9

9

1,00

5

45

9

9

1,00

10

80

8

9

0,89

* Packing 1 liter is not a factory, the cost of the material is not taken into account the price per packagings

read more

Surface Preparation: the surface should be firm, smooth, without dust, not crumbling. It is recommended to use high-quality finishing putty as a material for surface preparation.

Application: apply minimum two layers on prepared surface using a roller, brush or compressor.

Dilution with water: for strongly moisture absorbing surfaces: first layer – 50% of water, second layer – 30-40% of water. For normal absorbing surfaces: first layer – 40% of water, second layer – 30-40% of water. For applying with the help of compressor – 50% of water. The quantity of water percentagewise to paint is specified calculated per volume (1l of paint is diluted with 300 – 500 millilitres of water).

Using instrument: roller, brush, compressor.

Time of drying: time of drying between layers is 6 hours. The whole drying is 12 hours.

Expense of the material: 7-10 m2/L in two layers according to the colour and moisture absorption of the surface.